View HFC1005GTR90_4643346.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

KOA SPEER ELECTRONICS, INC.
SS-226 R3
NEW Frequency Ceramic Capacitor High
HFC Series
1. Features
I I I I I I I
AHA 8/12/04
CERTIFIED
Suitable for surface mounting. (Chip type) Low dielectric loss at high frequency. ( High Q) Narrow tolerance of capacitance Excellent temperature characteristics High reliability and no polarity by single layer ceramic substrate construction 0.10 ~ 1.10 pF available by 0.05 pF range (HFC1005 series) 0.10 ~ 1.20 pF available by 0.05 pF range (HFC1410, 1608, 1610, 1612 series)
2. Applications
I
Microwave circuit
I
Mobile phone headset
I
Others
3. Type Designation Type designation shall be as the following form.
HFC
Type
1608
Size
C
Material Code B C G H K N S T V
T
Termination Material T= 100% Tin
TD
Packaging
R10
Nominal Capacitance 2 Significant digits + zeros with R as decimal
1005: 1.0 x 0.5 mm 1410: 1.4 x 1.0 mm 1608: 1.6 x 0.8 mm 1610: 1.6 x 1.0 mm 1612: 1.6 x 1.2 mm
TD: Paper Tape (1005 only-10,000 pcs/reel) TE: Embossed Taping 1410: 3,000 pcs/reel 1608: 4,000 pcs/reel 1610: 3,000 pcs/reel 1612: 3,000 pcs/reel
4. Dimensions Table 1 Part 1005 1410
Bolivar Drive
I
Dimensions - inches (mm) L W
0.0390.006 (1.000.15) 0.0550.006 (1.400.15) P.O. Box 547
I
L
W
T
0.0200.004 (0.500.10) 0.0390.004 (1.000.10) T
0.0200.004 (0.500.10) 0.0390.004 (1.000.10) Bradford, PA 16701
PAGE 1 OF 9
I
I
USA
I
814-362-5536
Fax 814-362-8883
I
www.koaspeer.com
KOA SPEER ELECTRONICS, INC.
SS-226 R3
4. Dimensions Cont.
L W
Table 1 Part 1608
T
Dimensions - inches (mm) L W
0.0630.006 (1.600.15) 0.0630.006 (1.600.15) 0.0630.006 (1.600.15) 0.0310.004 (0.800.10) 0.0390.004 (1.000.10) 0.0470.004 (1.200.10)
T
0.0280.008 (0.700.20) 0.0330.01 (0.850.25) 0.0430.008 (1.100.20)
1610 1612
5. Characteristics of Dielectric Materials Table 2 - HFC1005 Series Material Code T N K V H G S B Table 2 - HFC1410, 1608, 1610, 1612 Series
r
f
(ppm/C)
010 610 610 3010 030 030 030 030
Material Code C T N V
r
f
(ppm/C)
010 010 610 3010
37.01.5 70.03.0 92.02.0 113.05.0 140.03.0 160.04.0 180.04.0 200.05.0
21.52.0 37.01.5 70.03.0 113.05.0
6. Standard Specifications Ordering Code
HFC1005TTR10 HFC1005TTR15 HFC1005NTR20 HFC1005NTR25 HFC1005KTR30
Capacitance (pF)
0.10 0.15 0.20 0.25 0.30
Tolerance Code (pF) 0.015
Material Code T N K
Rated Voltage DC(V)
Operating Temp. Range -55C
50
to 125C
PAGE 2 OF 9
0.030
Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
KOA SPEER ELECTRONICS, INC.
SS-226 R3
6. Standard Specifications Cont. Ordering Code
HFC1005KTR35 HFC1005VTR40 HFC1005VTR45 HFC1005VTR50 HFC1005VTR55 HFC1005VTR60 HFC1005HTR65 HFC1005HTR70 HFC1005HTR75 HFC1005GTR80 HFC1005GTR85 HFC1005GTR90 HFC1005GTR95 HFC1005ST1R0 HFC1005BT1R1 HFC1410VT1R1 HFC1410VT1R2 HFC1410VT1R3 HFC1608CTR10 HFC1608TTR15 HFC1608NTR20 HFC1608NTR25 HFC1608NTR30 HFC1608NTR35 HFC1608VTR40 HFC1608VTR45 HFC1608VTR50 HFC1608VTR55
Capacitance (pF)
0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 1.10 1.10 1.20 1.30 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55
Tolerance Code (pF)
Material Code K
Rated Voltage DC(V)
Operating Temp. Range
0.03
V
-55C H 50 to 125C
0.05
G
S B 0.075 V C T 50 -55C to 125C
0.015
N 50 0.03 V
-55C to 125C
PAGE 3 OF 9 Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
KOA SPEER ELECTRONICS, INC.
SS-226 R3
6. Standard Specifications Cont. Ordering Code
HFC1610VTR60 HFC1610VTR65 HFC1610VTR70 HFC1610VTR75 HFC1610VTR80 HFC1610VTR85 HFC1610VTR90 HFC1612VTR95 HFC1612VT1R0
Capacitance (pF)
0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00
Tolerance Code (pF) 0.03
Material Code
Rated Voltage DC(V)
Operating Temp. Range
-55C V 0.05 50 to 125C
0.05
V
50
-55C to 125C
8. Self Resonant Frequency (SRF) vs. Capacitance Value HFC1410, 1608, 1610, 1612, series
100 Self Resonant Frequency (GHz)
Type: HFC1612VT1R0R05M50 (1.0 pF)
Q vs. Frequency
10,000 5
ESR vs. Frequency
1000 1
10
100
0.1 10
1 0.1 1 Capacitance (pF) 10
1 500
1000 Frequency (MHz)
1800
0.01 500
1000 Frequency (MHz)
1800
PAGE 4 OF 9 Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
KOA SPEER ELECTRONICS, INC.
SS-226 R3
9. Characteristics 9-1 Electrical Characteristics
Item Capacitance Requirement Within the specified tolerances of parts Conditions Frequency: 1 MHz Voltage: 1 Vrms Instrument: YHP4278A Frequency: 1 MHz Voltage: 1 Vrms Instrument: YHP4278A Test Voltage: Rated Voltage Electrification Time: 60 5 sec Test Voltage: 300% of the Rated Voltage Electrification Time: 1 to 5 sec Limit Surge Current: 50 mA or less
Q Value
100 or more
Insulation Resistance Breakdown Voltage
10,000 M or more No break down
9-2 Mechanical Characteristics
Item Adhesion of Electrodes Requirement No mechanical damage Conditions A static load of 5N(0.5 kgf) shall be applied in the direction of the arrow as follows
Printed Board
Chip
Load (5N)
Core Body Strength Substrate Bending Test
No mechanical damage
A static load of 5N(0.5 kgf) using a R 0.5 pressure rod shall be applied on the core of the component and held for 10 sec Solder a specimen to the substrate and bend it. (Displacement: 2mm)
20 Substrate
Visual Examination: No mechanical damage Capacitance: Within 2.0% or 0.02 pF whichever is more Q Value: 100 or more Insulation Resistance: 10,000 M or more
Weight Displacement
45 2
45 2
PAGE 5 OF 9 Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
KOA SPEER ELECTRONICS, INC.
SS-226 R3
9-3 Endurance Characteristics
Item Solderability Requirement A new coating of solder shall cover a minimum of 95% of the surface being immersed Conditions Flux: 25 wt% colophony Solder: H60A (Silver 3%) Preheating: 150C for 1 min Soldering Temperature: 230 5C Soldering Temperature: 215 5C (MC1005) Immersion Time: 3 1 sec Flax: 25 wt% colophony Solder: H60A (Silver 3%) Soldering Temperature: 270 5C Immersion Time: 10 1 sec Temperature: 60 2C Relative Humidity: 95% RH Test Voltage: Rated Voltage Test Hours: 1000 -0/+48 hours Temperature: 85 2C Relative Humidity: 85% RH Test Hours: 1000 -0/+48 hours Temperature: 125 2C Test Voltage: Rated Voltage Test Hours: 1000 -0/+48 hours Temperature: -55 2C Test Hours: 1000 -0/+48 hours Temperature: -55C 30 min 125C 30 min Hours for 1 Cycle: 2 hours Temperature Cycle: 50 cycles or more Visual Examination: No mechanical damage Capacitance: Within 2.0% or 0.02 pF whichever is more Q Value: 100 or more Insulation Resistance: 10,000 M or more Frequency of Vibration: 10 to 100 Hz Sweeping: 1010010Hz 5 min 5.0 G This motion shall be applied for a period of 2 hrs in each of 3 mutually perpendicular axes Half of sine wave (100 G) shall be applied for a period of 5 msec. in each of 3 mutually perpendicular axes
Resistance to Soldering Heat
Resistance to Humidity (Load Test) Resistance to Humidity (Unload Test) Resistance to High Temperature Resistance to Low Heat Temperature Cycle Vibration
Visual Examination: No mechanical damage Capacitance: Within 2.0% or 0.02 pF whichever is more Q Value: 100 or more Insulation Resistance: 10,000 M or more
Shock
The specimen shall be subjected to standard atmospheric condition for 24 hours after which measurement shall be made.
PAGE 6 OF 9 Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
KOA SPEER ELECTRONICS, INC.
SS-226 R3
10. Packaging (1) Dimensions of Carrier Tape
Embossed Tape
T
Paper Tape
T1 H
F J
Dimensions in inches (mm)
E
D
C
G
T1
T
B
A
Dimensions in inches (mm)
A 0.026 0.001 (0.65 0.03) 0.047 0.002 (1.20 0.05) 0.039 0.002 (1.00 0.05) 0.047 0.002 (1.20 0.05) 0.055 0.002 (1.40 0.05) B 0.79 0.002 (2.00 0.05) 0.157 0.004 (4.00 0.10) 0.157 0.004 (4.00 0.10) 0.157 0.004 (4.00 0.10) 0.157 0.004 (4.00 0.10) C 0.315 0.004 (8.00 0.10) 0.315 0.008 (8.00 0.20) 0.315 0.008 (8.00 0.20) 0.315 0.008 (8.00 0.20) 0.315 0.008 (8.00 0.20) D 0.138 0.002 (3.50 0.05) 0.138 0.002 (3.50 0.05) 0.138 0.002 (3.50 0.05) 0.138 0.002 (3.50 0.05) 0.138 0.002 (3.50 0.05) E 0.069 0.004 (1.75 0.10) 0.069 0.004 (1.75 0.10) 0.069 0.004 (1.75 0.10) 0.069 0.004 (1.75 0.10) 0.069 0.004 (1.75 0.10)
HFC1005 HFC1410 HFC1608 HFC1610 HFC1612
Dimensions in inches (mm)
F G H 0.157 0.004 0.045 0.001 0.059 +0.004/-0 HFC1005 (4.00 0.10) (1.15 0.03) (o 1.50 +0.1/-0) HFC1410 HFC1608 HFC1610 HFC1612 0.157 0.004 0.063 0.002 (4.00 0.10) (1.60 0.05) 0.157 0.004 0.071 0.002 (4.00 0.10) (1.80 0.05) 0.157 0.004 0.071 0.002 (4.00 0.10) (1.80 0.05) 0.157 0.004 0.071 0.002 (4.00 0.10) (1.80 0.05) 0.061 0.002 (o 1.55 0.05) 0.061 0.002 (o 1.55 0.05) 0.061 0.002 (o 1.55 0.05) 0.061 0.002 (o 1.55 0.05) J N/A T 0.026 0.001 (0.65 0.02) T1 0.024 0.002 (0.60 0.05) 0.047 0.004 (1.20 0.10) 0.030 or 0.037 0.004 (0.75 or 0.95 0.10)
0.079 0.002 0.012 0.002 (2.00 0.05) (0.30 0.05) 0.079 0.002 0.012 0.002 (2.00 0.05) (0.30 0.05)
0.079 0.002 0.012 0.002 0.031 or 0.039 or 0.047 0.004 (2.00 0.05) (0.30 0.05) (0.80 or 1.00 or 1.20 0.10) 0.079 0.002 0.012 0.002 (2.00 0.05) (0.30 0.05) 0.055 0.004 (1.40 0.10) PAGE 7 OF 9
Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
KOA SPEER ELECTRONICS, INC.
SS-226 R3
(2) Reel specifications for taping
C
E D B
W A
Dimensions in inches (mm) A HFC Series
HFC1005 only
7.00 0.78 (178 2)
B
3.15 (80 min.) 2.36 (60 min.)
C
0.511 0.02 (13 0.5)
D
0.83 0.03 (21 0.8)
E
0.079 0.02 (2 0.5)
W
0.394 0.059 (10 1.5)
(3) Standard Packing Quantity
Chip Size 1005 1410 1608 1610 1612 Quantity 10,000 pcs/reel 3,000 pcs/reel 4,000 pcs/reel 3,000 pcs/reel 3,000 pcs/reel
PAGE 8 OF 9 Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
KOA SPEER ELECTRONICS, INC.
SS-226 R3
12. General Information (1) Storage
The products shall be stored at 10C to 35C at the humidity of 30% to 70%. The products shall not be stored where they are exposed to harmless gases. (Ex. Hydrogen chloride, Sulfurous acid gas or Hydrogen sulfide) Soldering shall be done 12 months since delivery. When the former requirements are not satisfied, the solderability test shall be done prior to soldering.
(4) Cleaning
Cleaning using isopropyl alcohol shall be done at a temperature of 60C or less within 5 minutes. It has been checked that the products aren't damaged by ultrasonic cleaning at a cleaning agent temperature of 60C or less, a frequency of 28kHz and a power of 20W within a minute.
(6) Pattern design
The land pattern is recommended as follows.
G
(3) Soldering
Ceramics are in general very sensitive to thermal shocks. Therefore the products shall not be exposed to a sudden temperature increase, decrease or partial heating. Preheat shall be done before using the soldering iron (ex. Hot wind etc.) Temperature difference between temperature of soldering iron tip and temperature of the products shall not exceed 130C. The soldering iron shall not contact directly with the product, in order to avoid damage to the product. It is desirable that soldering temperature is 240C to 250C. Flux shall be colophony type. Strong acid type flux shall not be used. Wattage of the soldering iron shall be 20W or less at the temperature of 220C to 250C. The tip of soldering iron shall be 3o or less. Application time of the soldering shall be 4 seconds or less.
Dimensions - inches (mm) Part L
0.015 (0.40) 0.031 (0.80) 0.039 (1.00) 0.039 (1.00) 0.039 (1.00)
W
0.020 (0.50) 0.039 (1.00) 0.031 (0.80) 0.039 (1.00) 0.047 (1.20)
W
1005 1410 1608 1610 1612
13. Recommended Soldering Conditions
Recommended Condition for Flow Soldering
Preheat 120 Seconds Max. 250C Soldering 3-4 Seconds Max. Natural Cooling 250C
Recommended Condition for Reflow Soldering
Preheat 180 Seconds Max. Soldering 10 Seconds Max. Natural Cooling
120 Seconds Min.
120 Seconds Min.
230C - 250C 150C 150C
230C - 250C
PAGE 9 OF 9 Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
Notice: The information contained in this Spec Sheet is believed to be accurate and up-to-date. KOA Speer Electronics reserves this right to change these specifications without notice.

▲Up To Search▲

Price & Availability of HFC1005GTR90

	To Download HFC1005GTR90 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .